Warco - Feed, Gears & Threading
Gears
| Teeth | Qty | Conditon |
|---|---|---|
| 20 | 1 | |
| 25 | 1 | |
| 26 | 1 | |
| 30 | 1 | |
| 35 | 1 | |
| 36 | 1 | |
| 38 | 1 | |
| 40 | 1 | |
| 44 | 1 | |
| 45 | 1 | |
| 48 | 1 | |
| 50 | 1 | |
| 60 | 1 | |
| 61 | 1 | |
| 62 | 1 | |
| 63 | 1 |
Threading
Threading Gear Arrangement
Inline
Image from manual
Stepped
###Threading - Metric
| Pitch | Z1 | Z2 | Z3 | Z4 | Z5 | Z6 | Notes |
|---|---|---|---|---|---|---|---|
| 0.4 | 32 | 50 | 30 | 60 | 20 | 64 | |
| 0.5 | 32 | 40 | 30 | 60 | 20 | 64 | |
| 0.6 | 32 | 40 | 30 | 50 | 20 | 64 | |
| 0.7 | 32 | 40 | 35 | 50 | 20 | 64 | |
| 0.75 | 32 | 40 | 30 | 60 | 25 | 64 | |
| 0.8 | 32 | 40 | 40 | 50 | 20 | 64 | Not possible due missing gear |
| 1.0 | 32 | 40 | 20 | 50 | 50 | 64 | Not possible due missing gear |
| 1.0 alt | 32 | 40 | 20 | 60 | 45 | 48 | |
| 1.25 | 32 | 40 | 25 | 50 | 50 | 64 | Not possible due missing gear |
| 1.25 alt | 32 | 40 | 25 | 60 | 45 | 48 | |
| 1.5 | 32 | 40 | 30 | 50 | 50 | 64 | Not possible due missing gear |
| 1.5 alt | 32 | 40 | 30 | 60 | 45 | 48 | |
| 1.75 | 32 | 40 | 35 | 50 | 50 | 64 | Not possible due missing gear |
| 2.0 | 32 | 40 | 40 | 50 | 50 | 64 | Not possible due missing gear |
| 2.5 | 32 | 64 | 50 | 45 | 45 | 40 | Not possible due missing gear |
| 3.0 | 32 | 64 | 45 | 50 | 50 | 30 | Not possible due missing gear |
| 3.5 | 32 | 64 | 35 | 60 | 60 | 20 | Not possible due missing gear |
| 4.0 | 32 | 64 | 50 | 45 | 45 | 25 | Not possible due missing gear |
| 4.5 | 32 | 64 | 45 | 50 | 50 | 20 | Not possible due missing gear |
| 5.0 | 32 | 64 | 50 | 45 | 45 | 20 | Not possible due missing gear |
| 6.0 | 32 | 64 | 50 | 40 | 60 | 25 | |
| 7.0 | 32 | 64 | 60 | 30 | 35 | 20 | |
| 8.0 | 32 | 64 | 60 | 30 | 50 | 20 | |
| 9.0 | 32 | 64 | 60 | 30 | 45 | 20 | |
| 10.0 | 32 | 64 | 60 | 30 | 50 | 20 | |
| 12.0 | 32 | 64 | 60 | 25 | 50 | 20 |
Threading - Inch
| Threads/1“ | Z1 | Z2 | Z3 | Z4 | Z5 | Z6 | Notes |
|---|---|---|---|---|---|---|---|
| 3 | 32 | 63 | 50 | 36 | 60 | 20 | |
| 3.25 | 32 | 63 | 50 | 30 | 60 | 26 | |
| (3.5) | 32 | 63 | 50 | 35 | 60 | 24* | * Gear not available |
| 4 | 32 | 63 | 50 | 48 | 60 | 20 | |
| 4.5 | 32 | 63 | 50 | 30 | 60 | 36 | |
| 5 | 32 | 63 | 45 | 36 | 50 | 25 | |
| 6 | 32 | 63 | 50 | 30 | 60 | 48 | |
| 7 | 32 | 63 | 50 | 35 | 60 | 48 | |
| 8 | 32 | 63 | 50 | 30 | 45 | 48 | |
| 9 | 32 | 60 | 60 | 36 | 50 | 63 | Not possible due missing gear |
| 10 | 32 | 60 | 60 | 50 | 50 | 63 | Not possible due missing gear |
| 11 | 32 | 60 | 60 | 44 | 50 | 63 | Not possible due missing gear |
| (11.5) | 32 | 60 | 60 | 46* | 50 | 63 | * Gear not available |
| 12 | 32 | 40 | 40 | 48 | 50 | 63 | Not possible due missing gear |
| 13 | 32 | 50 | 50 | 26 | 25 | 63 | Not possible due missing gear |
| 14 | 32 | 63 | 50 | 35 | 30 | 48 | |
| 16 | 32 | 60 | 50 | 48 | 45 | 63 | |
| 18 | 32 | 60 | 60 | 36 | 25 | 63 | Not possible due missing gear |
| 18 alt | 32 | 48 | 20 | 36 | 60 | 63 | Needs to be tested |
| 19 | 32 | 40 | 40 | 38 | 25 | 63 | Not possible due missing gear |
| 19 alt | 32 | 48 | 40 | 38 | 30 | 63 | Needs to be tested |
| 20 | 32 | 50 | 50 | 40 | 25 | 63 | Not possible due missing gear |
| 20 alt | 32 | 64 | 20 | 63 | 50 | 25 | Requires gears to be stepped rather than inline |
| 22 | 32 | 50 | 50 | 44 | 25 | 63 | Not possible due missing gear |
| 24 | 32 | 50 | 50 | 48 | 25 | 63 | Not possible due missing gear |
| 27 | 32 | 60 | 50 | 36 | 20 | 63 | |
| 28 | 32 | 48 | 25 | 63 | 30 | 35 | |
| 32 | 32 | 60 | 45 | 48 | 25 | 63 | |
| 36 | 32 | 60 | 30 | 63 | 25 | 36 | |
| 40 | 32 | 60 | 30 | 63 | 25 | 40 | |
| 44 | 32 | 60 | 30 | 63 | 25 | 44 | |
| 48 | 32 | 48 | 30 | 60 | 25 | 63 | |
| 60 | 32 | 48 | 30 | 60 | 20 | 63 | |
| 72 | 32 | 48 | 25 | 60 | 20 | 63 |
Power Feed Setup
| Threads/1” | Z1 | Z2 | Z3 | Z4 | Z5 | Z6 | Notes |
|---|---|---|---|---|---|---|---|
| 32 |
127.0.0.1