- Replace Z leadscrews with flexible couplings and M6 A4 Stainless Threaded Rod + Brass Nuts
<s>Insulate under bed, ~6 layers of cardboard</s>
<s>Turn heated bed upside down</s>
<s>Remove Heated Bed relay</s>
<s>Replace X ends with better design with onboard motor mount</s>
- Replace Carriage
<s>Replace Y motor mount with better supported mount</s>
- Add new base for electronics etc mount
- Replace Mainboard with RAMPS
- Replace screen with RRD Smart Controller
- Replace 608zz bearings on X and Y with MR148-ZZ
Parts Needed
<s>strikethrough</s> = bought, bold = arrived
- M6 A4 Threaded Rod
- <s>M6 Brass Nuts</s>
- <s>RAMPS Board</s>
- <s>Arduino Mega</s>
- <s>RRD Smart Controller</s>
<s>A3 Piece of dibond</s>
<s>10x MR148-ZZ</s>
Printed Parts
Clear
- 2x <s>Printed Nut Coupling</s>
- 1x <s>Y motor mount 1</s>
Black
- 2x <s>tbsliver-x-ends</s>
- 2x <s>bases for x ends</s>
White
- 1x <s>RRD SmartController Back Case 4</s>
127.0.0.1