There are 4 fretsaw's we have in total

• Draper - Part: FS325A (green - currently in woody dusty)
• Fern - Part: FFZ-400N (green with air assist - currently in the corridor)
• Draper - Part: FS16A (black - currently on top of the metal area)
• PowerCraft - Part: PowerPlus POWX190 (location unknown, maybe top of metal area

• Blade length - 127mm (5“)
• Use 10 tpi for thicker material, 15/30tpi for thinner material

This tool takes 5” (127mm) length pinned blades as a preference (although it can take flat blades as explained in the manual)

• http://doc.ferm.com/Servotool/documents/SSM4001%20Manual%20%200210-25%20.pdf

• Maximum cut - 50mm (2“)
• Throat depth - 400mm (16”)
• Blade length - 127mm (5“)
• Cuts per minute - 1450
• Stroke - 19mm
• Table size - 374 x 200mm
• Table tilt - 0-45°
• Machine dimensions - 400 x 216 x 220mm
• Motor - 93W (230V/A.C.)
• Nett/gross weight - 20/23kg

The typical sound pressure level of this tool is less than 70db

This tool takes 5” (127mm) length pinned blades as a preference (although it can take flat blades as explained in the manual)

We usually stock 0.25x2mm (0.010×0.080 inch), 7.5z/cm (18.5TPI) blades, which are stored in the blue toolbox marked SPARE SAW BLADES.

Draper Fretsaw Manual

Also sold as the PowerPlus POWX190 scroll saw, this saw is a bit bigger than the Draper model.

Blade size: 133 x 2.6mm, pinned as a preference

Power Craft Fretsaw Manual

• Don't leave the machine while it's running - it can frequently move on its own
• Use guard to prevent blades and material breaking in a dangerous way.

Category:Equipment Category:Woodspace Category:Team Woodwork