Show pageOld revisionsBacklinksAdd to bookExport to PDFBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. # Pillar Drill There are two pillar drills in Metalwork This drill is a much larger drill that can be used for metal / wood, for drilling thick materials or where more clearance is required. Drill chuck is MT2 (morse taper MT2) - <https://littlemachineshop.com/reference/tapers.php> original drill chuck is 5/8ths of an inch or 0.625" or 16mm which is the size of the maximum drill bit that will fit in the chuck ### Risk Assessments [Pillar Drill](https://docs.google.com/document/d/1ig6mghyfCGQnn0kOcE3Z2foC5rsd1CZbelOLopmDXX4/edit?usp=sharing) [Category:Equipment](Category:Equipment "wikilink") workshop/metalwork/equipment/pillar-drill.txt Last modified: 2022/11/30 16:33by 127.0.0.1