workshop:metalwork:equipment:lathes:warco-feed [Hacman DEMO ONLY]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
# Warco - Feed, Gears & Threading

## Gears

| Teeth                              | Qty                | Conditon |
|------------------------------------|--------------------|----------|
| 20                                 | 1                  |          |
| 25                                 | 1                  |          |
| 26                                 | 1                  |          |
| 30                                 | 1                  |          |
| 35                                 | 1                  |          |
| 36                                 | 1                  |          |
| 38                                 | 1                  |          |
| 40                                 | 1                  |          |
| 44                                 | 1                  |          |
| 45                                 | 1                  |          |
| 48                                 | 1                  |          |
| 50                                 | 1                  |          |
| 60                                 | 1                  |          |
| 61                                 | 1                  |          |
| 62                                 | 1                  |          |
| 63                                 | 1                  |          |

## Threading
### Threading Gear Arrangement
#### Inline 
Image from manual

#### Stepped

{{:workshop:metalwork:equipment:lathes:stepped_gear_arrangement.jpg?400|}}

###Threading - Metric
| Pitch | Z1 | Z2 | Z3 | Z4 | Z5 | Z6 | Notes |
|-------|----|----|----|----|----|----|-------|
| 0.4   | 32 | 50 | 30 | 60 | 20 | 64 |       |
| 0.5   | 32 | 40 | 30 | 60 | 20 | 64 |       |
| 0.6   | 32 | 40 | 30 | 50 | 20 | 64 |       |
| 0.7   | 32 | 40 | 35 | 50 | 20 | 64 |       |
| 0.75  | 32 | 40 | 30 | 60 | 25 | 64 |       |
| 0.8   | 32 | 40 | 40 | 50 | 20 | 64 | Not possible due missing gear |
| 1.0   | 32 | 40 | 20 | 50 | 50 | 64 | Not possible due missing gear |
| 1.0 alt| 32 | 40 | 20 | 60 | 45 | 48 |      |
| 1.25  | 32 | 40 | 25 | 50 | 50 | 64 | Not possible due missing gear |
| 1.25 alt| 32 | 40 | 25 | 60 | 45 | 48 |      |
| 1.5   | 32 | 40 | 30 | 50 | 50 | 64 | Not possible due missing gear |
| 1.5 alt| 32 | 40 | 30 | 60 | 45 | 48 |      |
| 1.75  | 32 | 40 | 35 | 50 | 50 | 64 | Not possible due missing gear |
| 2.0   | 32 | 40 | 40 | 50 | 50 | 64 | Not possible due missing gear |
| 2.5   | 32 | 64 | 50 | 45 | 45 | 40 | Not possible due missing gear |
| 3.0   | 32 | 64 | 45 | 50 | 50 | 30 | Not possible due missing gear |
| 3.5   | 32 | 64 | 35 | 60 | 60 | 20 | Not possible due missing gear |
| 4.0   | 32 | 64 | 50 | 45 | 45 | 25 | Not possible due missing gear |
| 4.5   | 32 | 64 | 45 | 50 | 50 | 20 | Not possible due missing gear |
| 5.0   | 32 | 64 | 50 | 45 | 45 | 20 | Not possible due missing gear |
| 6.0   | 32 | 64 | 50 | 40 | 60 | 25 |       |
| 7.0   | 32 | 64 | 60 | 30 | 35 | 20 |       |
| 8.0   | 32 | 64 | 60 | 30 | 50 | 20 |       |
| 9.0   | 32 | 64 | 60 | 30 | 45 | 20 |       |
| 10.0  | 32 | 64 | 60 | 30 | 50 | 20 |       |
| 12.0  | 32 | 64 | 60 | 25 | 50 | 20 |       |

### Threading - Inch
| Threads/1" | Z1 | Z2 | Z3 | Z4 | Z5 | Z6 | Notes |
|------------|----|----|----|----|----|----|-------|
| 3          | 32 | 63 | 50 | 36 | 60 | 20 |       |
| 3.25       | 32 | 63 | 50 | 30 | 60 | 26 |       |
| (3.5)      | 32 | 63 | 50 | 35 | 60 | 24* | * Gear not available |
| 4          | 32 | 63 | 50 | 48 | 60 | 20 |       |
| 4.5        | 32 | 63 | 50 | 30 | 60 | 36 |       |
| 5          | 32 | 63 | 45 | 36 | 50 | 25 |       |
| 6          | 32 | 63 | 50 | 30 | 60 | 48 |       |
| 7          | 32 | 63 | 50 | 35 | 60 | 48 |       |
| 8          | 32 | 63 | 50 | 30 | 45 | 48 |       |
| 9          | 32 | 60 | 60 | 36 | 50 | 63 | Not possible due missing gear |
| 10         | 32 | 60 | 60 | 50 | 50 | 63 | Not possible due missing gear |
| 11         | 32 | 60 | 60 | 44 | 50 | 63 | Not possible due missing gear |
| (11.5)     | 32 | 60 | 60 | 46* | 50 | 63 | * Gear not available|
| 12         | 32 | 40 | 40 | 48 | 50 | 63 | Not possible due missing gear |
| 13         | 32 | 50 | 50 | 26 | 25 | 63 | Not possible due missing gear |
| 14         | 32 | 63 | 50 | 35 | 30 | 48 |       |
| 16         | 32 | 60 | 50 | 48 | 45 | 63 |       |
| 18         | 32 | 60 | 60 | 36 | 25 | 63 | Not possible due missing gear |
| 18 alt     | 32 | 48 | 20 | 36 | 60 | 63 | Needs to be tested |
| 19         | 32 | 40 | 40 | 38 | 25 | 63 | Not possible due missing gear |
| 19 alt     | 32 | 48 | 40 | 38 | 30 | 63 | Needs to be tested |
| 20         | 32 | 50 | 50 | 40 | 25 | 63 | Not possible due missing gear |
| 20 alt     | 32 | 64 | 20 | 63 | 50 | 25 | Requires gears to be stepped rather than inline |
| 22         | 32 | 50 | 50 | 44 | 25 | 63 | Not possible due missing gear |
| 24         | 32 | 50 | 50 | 48 | 25 | 63 | Not possible due missing gear |
| 27         | 32 | 60 | 50 | 36 | 20 | 63 |       |
| 28         | 32 | 48 | 25 | 63 | 30 | 35 |       |
| 32         | 32 | 60 | 45 | 48 | 25 | 63 |       |
| 36         | 32 | 60 | 30 | 63 | 25 | 36 |       |
| 40         | 32 | 60 | 30 | 63 | 25 | 40 |       |
| 44         | 32 | 60 | 30 | 63 | 25 | 44 |       |
| 48         | 32 | 48 | 30 | 60 | 25 | 63 |       |
| 60         | 32 | 48 | 30 | 60 | 20 | 63 |       |
| 72         | 32 | 48 | 25 | 60 | 20 | 63 |       |

### Power Feed Setup
| Threads/1" | Z1 | Z2 | Z3 | Z4 | Z5 | Z6 | Notes |
|------------|----|----|----|----|----|----|-------|
|            | 32 |    |    |    |    |    |       |