old:equipment:wood-lathe [Hacman DEMO ONLY]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
We have a Draper wood lathe in the woody/dusty area. This is a **work in
progress** and is not yet fully ready for use.

When completed it should be able to turn projects on a faceplate or
between centres. There is an aspiration to add a four-jaw chuck for
projects that require a chuck.

This lathe is for wood projects. For metal/plastic projects, see
[Myford_ML_7_Lathe](Myford_ML_7_Lathe "wikilink")

Manuals
-------

We have been unable to locate a PDF manual for the Draper lathe, but the
following manual (for a Clarke CWL12D) appears to describe an identical
tool.

![<File:Clarke> CWL12D.pdf](Clarke_CWL12D.pdf "File:Clarke CWL12D.pdf")

To do list
----------

To get the lathe in safe use:

-   Add a lock to the front door of woody dusty, clear the secondary
    door, add sign to secondary door that it cannot be blocked

Longer term aims:

-   PAT test.
-   Fit a power switch that is locked via the key used for the "lathe in
    use sign"

Completed:

-   Acquire and fit suitable chuck (alex)
-   build bespoke table (alex)
-   build dust extraction (alex)
-   draw warning line on floor (alex)
-   Complete risk assessment.
-   Assign tool trainers. (alex)
-   Re-mount lathe closer to edge of bench. Completed 21/04/18 by
    Richard
-   Machine and fit brass pin to allow tailstock to be fixed in place.
    Completed 19/04/18 by Greg and Stewie
-   Acquire suitable PPE. Completed (Bob)
-   Carbide tooling

Pledge Drive
------------

There is an ongoing pledge drive to acquire carbide tools and face
shields.

[Pledges/Wood Lathe Startup](Pledges/Wood_Lathe_Startup "wikilink")

Essential dimensions
--------------------

-   Headstock and tailstock taper: No.1 Morse Taper
-   Faceplate/chuck fitting: 3/4" x 16TPI, right hand.
-   Maximum work length: 37" (between centres). Less if using
    chuck/faceplate.
-   Maximum work diameter: 12".

For further information, see manual.

Risk Assessment
---------------

[Category:Equipment](Category:Equipment "wikilink")
[Category:Bloody_dangerous_equipment](Category:Bloody_dangerous_equipment "wikilink")
[Category: Projects](Category:_Projects "wikilink")