Show pageOld revisionsBacklinksAdd to bookExport to PDFBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. - Replace Z leadscrews with flexible couplings and M6 A4 Stainless Threaded Rod + Brass Nuts - <s>Insulate under bed, \~6 layers of cardboard</s> - <s>Turn heated bed upside down</s> - <s>Remove Heated Bed relay</s> - <s>Replace X ends with better design with onboard motor mount</s> - Replace Carriage - <s>Replace Y motor mount with better supported mount</s> - Add new base for electronics etc mount - Replace Mainboard with RAMPS - Replace screen with RRD Smart Controller - Replace 608zz bearings on X and Y with MR148-ZZ Parts Needed ------------ <s>strikethrough</s> = bought, **bold** = arrived - M6 A4 Threaded Rod - **<s>M6 Brass Nuts</s>** - **<s>RAMPS Board</s>** - **<s>Arduino Mega</s>** - **<s>RRD Smart Controller</s>** - <s>A3 Piece of dibond</s> - <s>10x MR148-ZZ</s> Printed Parts ------------- ### Clear - 2x <s>Printed Nut Coupling</s> - 1x <s>Y motor mount [1](http://www.thingiverse.com/thing:128128)</s> ### Black - 2x <s>tbsliver-x-ends</s> - 2x <s>bases for x ends</s> ### White - 1x [BQF](http://www.thingiverse.com/thing:54414) Top [2](http://www.thingiverse.com/download:141192) - 1x [BQF](http://www.thingiverse.com/thing:54414) Bottom [3](http://www.thingiverse.com/download:141191) - 1x <s>RRD SmartController Back Case [4](http://www.thingiverse.com/download:101640)</s> - 1x <s>RRD SMartController Front Case [97.4](http://www.thingiverse.com/download:101637) or [98.4](http://www.thingiverse.com/download:101638)</s> ### Red - 4x <s>Mendel90 Z Motor Couplings [5](https://github.com/nophead/Mendel90/blob/master/dibond/stls/z_coupling.stl)</s> - 1x <s>RRD Case Kill Button [6](http://www.thingiverse.com/download:101641)</s> - 1x <s>RRD Case Controller Knob [7](http://www.thingiverse.com/download:112235)</s> [Category:Mendel Max](Category:Mendel_Max "wikilink") old/equipment/reprap-mendelmax/early-2014-upgrades.txt Last modified: 2022/11/30 16:33by 127.0.0.1